Using The Web Configuration - D-Link AirPlus G DP-G310 Manual

Using the Web Configuration
Please use an Ethernet connection for the configuration of the DP-G310. Using
a CAT5 cable, connect the DP-G310 to the Ethernet-adapter equipped computer
in your network that you will be using for configuration. Open your web browser
and type http://192.168.0.10 in the address box, and press Enter. This set of
numbers is the default IP Address of your Print Server. Please note that the PC's
IP Address must correspond with the Print Server's IP Address in the same
segment for the two devices to communicate.
When you enter the default IP address, the main screen of the Print Server's configuration
will appear (see below). In addition to the product information, you can access and control
the Print Server's configuration through four links on the top of this main screen: Home,
Configuration, Tools, and Help.
12