Using The Web Conﬁguration - D-Link DP-G310 Manual

Wireless g print server

Hide thumbs Also See for DP-G310:

Table of Contents

DP-G310 User's Manual

Please use an Ethernet connection for the conﬁguration of the DP-G310. Using a CAT5 cable, connect the print

server to the Ethernet-adapter equipped computer in your network that you will be using for conﬁguration. Open

your web browser and type http://192.168.0.10 in the address box, and press Enter. This set of numbers is the

default IP Address of your Print Server. Please note that the PC's IP Address must correspond with the Print

Server's IP Address in the same segment for the two devices to communicate.

When you enter the default IP address, the main screen of the Print Server's conﬁguration will appear (see

below). In addition to the product information, you can access and control the Print Server's conﬁguration through

four links on the top of this main screen: Home, Conﬁguration, Tools, and Help.

D-Link Systems, Inc.

Using the Web Conﬁguration

Table of Contents