Page 2
DP-G301 until you are advised to do so. Warning! Only a parallel port printer may be connected to the parallel port of the DP-G301. Do not connect any other parallel port device to the parallel port; doing so may damage the unit, voiding the warranty for this product.
Page 3
For additional Windows operating system setup or information on the web-management interface, refer to the manual located on the CD-ROM. The factory default IP address of the DP-G301 is 192.168.0.10. In order to net- work to the printer through the DP-G301, the DP-G301 must have the same IP network settings as your network.
Page 4
Using your web browser enter the IP address of the DP-G301. By default the IP address is set to The IP address of the DP-G301 can be modified on the Network tab of the web configuration menu. The following instructions use the print server’s default IP address as an example.
Page 5
first going through an Access Point (AP) or wireless router. A workgroup name of your Wireless Network. All wireless devices must all have the same SSID to communicate on the Wireless Network. All D-Link Wireless devices have the default SSID of default, all lower case.
Page 6
Setting up your DP-G301 for network printing in Windows XP For Windows XP: Go to Start>Printers and Faxes>Add a Printer or Go to Start>Control Panel> Printers and Faxes Double-click on the “Add Printer” icon Click Next Select “Local Printer.” Please make sure to...
Page 7
Setting up your DP-G301 for network printing in Windows XP Select “Create a new port.” At the pull-down menu, highlight “Standard TCP/IP Port.” Click Next Click Next Type in the IP address of the print server. (i.e. 192.168.0.10) The port name will automatically be filled in.
Page 8
Setting up your DP-G301 for network printing in Windows XP (continued) Select “Custom” Then click on Settings. Click Settings Select “LPR” Input the port name of the port being used by the printer Click Click Next PS-121B28-U1...
Page 9
Setting up your DP-G301 for network printing in Windows XP Click Finish In this window, scroll down to find your printer. (If it is not listed, insert the driver CD or diskette that came with your printer.) Click on “Have Disk...”...
Page 10
Setting up your DP-G301 for network printing in Windows XP Select “Yes” to print a test page Click Next Your Setup is Complete! The printer is now ready for printing with Windows XP, on your network. Click Finish (continued)
Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.