Encryption Configuration; Advanced Setting - D-Link DP-G310 Manual

DP-G310 User's Manual
Configuration > Wireless (continued)
WEP Encryption
This field allows you to configure the settings of data encryption. Please remember that the WEP key must be set
before the data encryption is enforced.
WEP Encryption:
WEP Key Format:
(hexadecimal). 64-bit WEP encryption uses a 10 hexadecimal character key. The WEP encryption key must
match the WEP settings on your AP or wireless router to connect properly.
Then, enter the key(s) for the network in the Key box (1-4).
WPA-PSK:
This option allows you to use a WPA-PSK passphrase.
Preshared Key:

Advanced Setting

Beacon Interval:
Preamble:
This option allows you to set the length of the preamble. Setting options are:


Authentication Type:
and Both.
D-Link Systems, Inc.
Using the Web Configuration (continued)
This option allows you to select Disable, 64-bit, or 128-bit for encryption setting.
You can decide the network key to be encoded by ASCII (ASCII characters) or HEX
Enter the WPA-PSK passphrase or key used on your network.
Enter the number for the beacon interval in milliseconds.
Long: set to 144 bits
Short: set to 72 bits.
You can set the authentication type by selecting the settings: Open System, Shared Key,
Using the Web Configuration
18