Appletalk Printing For Mac Os9; Setting Up The Print Server For Appletalk Printing - D-Link DP-G310 Manual

DP-G310 User's Manual
Setting up Apple Talk Printing in Mac OS 9
Note: Mac OS printing with this print server supports PostScript printers only!
The AppleTalk network protocol is used with computers using the MacOS operating system. It can be used
for network communications over standard Ethernet or Fast Ethernet using the EtherTalk transport, or over a
proprietary low-speed LocalTalk transport.
Your Print Server can be used for network printing to PostScript printers.You can print from any MacOS computer
connected to your Ethernet network, either directly using an EtherTalk connection, or indirectly through a
LocalTalk-to-EtherTalk router.
NOTE: The Chooser name of a printer connected to one of the Print Server's ports is the same as its Port Name.
If you are using AppleTalk printing, you will need to make sure that every Port Name is unique among all of the
network printers in your AppleTalk zone. The Port Names shown in this manual are examples only.
To set up your Print Server so that it can be used for AppleTalk printing:
Make sure the AppleTalk protocol is enabled in your Macintosh.

 ChangetheIPaddressononeofthecomputersonyournetworkto192.168.0.x,
where x is any number between 11-254.
 Type 192.168.0.10 into the address field of your Web browser. 192.168.0.10
is the default IP Address of the DP-G310.
Select the Network tab and scroll to the bottom to the AppleTalk protocol

section.
 If your AppleTalk network is divided into AppleTalk zones, you will have to
specify which zone the Print Server should be in.You should locate the Print
Server in the same zone as most of the users who will be using it. If your
network is not divided into zones, the AppleTalk Zone field should contain a
single asterisk "*".
D-Link Systems, Inc.

Setting up the Print Server for AppleTalk Printing

Apple Talk Printing for Macintosh OS 9
45