Installer Setting - Function Setting In Group Control - LG PREMTB10U Installation & Operation Manual

Installer setting – Function setting in group control
It is the function to enable the control of common functions or some other functions by the in-
door unit standard during the group control.
INSTALLATION INSTRUCTIONS
1 If pressing button long for 3
seconds, it enters into Thermostat
installer setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
Press the button to select the option
2
function code as pictured below.
Select 'Function setting in group control'
3
setting by pressing button.
Function Code Function setting
in group control
❈ Function control setting values during
group control
00 : Common function
01 : Common function,
Some indoor unit master standard
Press button to save.
4
5 Pressing button will exit settings mode.
❈ After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈ When exiting without pressing set button,
the manipulated value is not reflected.
79