Deleting A Timer; The All On/All Off Feature; Troubleshooting; Device Does Not Respond To The Remote Control Commands - Silvercrest SFB 10.1 C3 User Manual And Service Information

SilverCrest SFB 10.1 C3
10. If required, you can program more event timers.
11. When an event timer is programmed, the
of the display.
After an event timer has completed it is erased automatically.
Press to go back one menu level. To return to the start window,
press one of the device buttons.

Deleting a timer

To delete a programmed timer ("SLEEP TIMER", "TIMER1" to "TIMER4"):
1. Press and hold the
2. Press
3. Select the timer that you wish to delete and press
display reads "CLEAR". Press
"SUCCESS". The selected timer is deleted. The display shows the
name of the selected timer ("SLEEP TIMER", "TIMER1" to "TIMER4").
Press to go back one menu level. To return to the start window,
press one of the device buttons.

The All on/All off feature

If you have programmed your remote control to control several devices,
this feature lets you switch all of them on or off at the same time by just
pressing one button. To do so, press and hold the
a few seconds. This switches all the devices on or off at the same time.
Depending on the number of devices programmed, this can take up to 10
seconds. The following is required for this feature to work:

A clear line of sight between the remote control and each device
you want to switch on/off.

All devices need to support powering on/off via remote control.

The automatic code search, brand code search and macro
functions must be disabled.

Troubleshooting

Device does not respond to the remote control commands


Please check that you have selected the correct device with the
remote control.

Point the remote control directly at the device.

Check if the remote control has been programmed with the correct
code for your device.

It is possible that the device is not compatible with programming
using the code list. In this case, please program the remote control
by using the learn function.

The batteries are low or empty. Replace the batteries with new
batteries of the same type. See also the chapter "Inserting the
batteries".
92 - English
button for at least 3 seconds.
, select "TIMER" and press
icon appears on the left
to confirm.
to confirm. The display reads
to confirm. The
button (3) for