Plug the square end of the USB cable into the USB upstream
3
port on the back of the dynadock.
(Sample Illustration) Connecting the USB cable to the dynadock
Plug the other end of the USB cable into an available USB 2.0
4
port on your computer.
(Sample Illustration) Connecting the USB cable to your computer
NOTE
Be sure to remember which USB port is used during the driver
installation and always plug the dynadock into the same USB port,
otherwise the Windows
new device and ask to install the drivers again. Only one dynadock can
be operated on one computer at a time.
dynadock™ User's Manual
®
operating system will treat the dynadock as a
21