Video Port (Vga Or Dvi) - Toshiba dynadock PA3541 User Manual

Video Port (VGA or DVI)

Connection
The dynadock is available in two versions:
VGA – for connection to VGA interface monitors
DVI – for connection to DVI interface monitors
The DVI version of the dynadock includes a DVI to VGA
adapter to connect to a VGA monitor.
Although the ports and video drivers are different, the connection
and setup is the same.
Connect the monitor cable (not provided) to the video output port on
the dynadock and the external monitor. This cable can be connected
and disconnected any time without disconnecting the dynadock from
the USB port on your computer.
NOTE
The dynadock should be connected to a USB 2.0 port for optimal
video performance. The dynadock will work connected to a USB1.1
port, however video performance will be compromised. The USB
connector may be plugged and unplugged while the dynadock is on.
You can customize the video settings of the dynodock.. See Adjusting
Video Settings for more information.
Viewable screens
The dynadock video drivers give you the option of viewing a total of
three screens.
The screen on the notebook,
1
External monitor connected to the video port on the notebook (if
2
available)
External monitor connected to the dynadock
3
NOTE
The external monitor connected to the dynadock may be identified as
either "2" or "3" on the Windows Display Properties screen
(depending on your model) although there may not be a total of 3
screens connected.
dynadock™ User's Manual
35