Advertisement
PRIMUS BUSINESS SERVICES
GUIDE
The STATUS indicator will turn
flash red
once to indicate that the ID is set to 1.
5. Set the ID of the origin repeater to be the same as the destination repeater.
If the ID of the destination repeater was not 1, press the PROGRAM button
on the origin repeater to select the ID that matches the destination repeater.
The ID will change by one each time the PROGRAM button is pressed.
(e.g., if you select ID 3 by pressing the button two times, the
will flash 3 times)
6. Press and hold the PROGRAM button for 5 seconds to assign the ID to the
origin repeater. The
PROGRAM button. The STATUS indicator and the
amber
for 2 seconds and then the STATUS indicator will start
indicating that the repeater is waiting to be found.
On the base unit:
7. On the base unit, press and hold the Handset locator button for 4 seconds
until the STATUS indicator
8. Once the destination repeater finds the origin repeater, the STATUS
indicator on the origin repeater will turn
successful.
9. On the base unit, exit registration mode by pressing the Handset locator
button.
10. To verify whether the setup was successful, turn off the destination repeater
by unplugging the AC adapter. On the origin repeater, the STATUS indicator
and the
indicator should both turn
connection was lost. Turn the destination repeater back on by plugging in
the AC adapter. Both indicators on the destination repeater should turn
solid
green, followed by the indicators on the origin repeater.
|
|
HOSTED PBX
PANASONIC A406 REPEATER QUICK SETUP
solid
green, and the
indicator will turn
solid
red. Release the
flashes
red.
solid
green. Registration is
solid
red, indicating that the
indicator will
indicator
indicator will turn
flashing
red,
PRIMUSBUSINESS.CA
5
Advertisement
