Data Display Screens - Toshiba 1600EP SERIES Instruction Manual

Data Display Screens

The 'Data Display Screens' sequentially display the data parameters that
can be monitored by operator. To enter the series of Data Display Screens,
press "UP" or "DOWN" arrows while the current System Overview Screen
is appearing.
NOTES
1 If the "SET/MONITOR" key is pressed from any of the Data Display
Screens then the display will advance to the Data Setting Screens. (see
page 36 the Data Settings Screens.
2 Displays L-N output voltages.
3 Displays the current as a % of maximum load capacity.
4 Displays the battery charge voltage as a % of the rated nominal DC
voltage of the batteries.
5 If the "SHIFT/SELECT" key is pressed from any one of the Timer Start
Data, Timer Stop Data, Weekly Schedule, Special Operate, and Special
Off time screens then special 'Data Display Screens' are viewed. These
functions can only to be changed by serial communication interface (see
page 37).
36
INPUT VOLTAGE
###V
INPUT FREQUENCY
##.#Hz
OUTPUT VOLTAGE
###V
OUTPUT FREQUENCY
##.#Hz
OUTPUT CURRENT
##%
BATTERY VOLTAGE
##%
BATT INSTALL DATE
11/04/1998
BATTERY LIFE
REMAIN 3.5YR
INTERNAL TEMP
## C
11/4/1998
10:45
TIMER START DATA
TO VIEW:SELECT
TIMER STOP DATA
TO VIEW: SELECT
CAL OPER MODE
DISABLE
WEEKLY SCHDULE
TO VIEW: SELECT
SPECIAL OPERATE
TO VIEW: SELECT
SPECIAL OPERATE
TO VIEW: SELECT
1600EP Series Instruction Manual