Adjusting the shape of the picture
Depending on the type of video source you are viewing, the picture might or
might not always look correct or fit on the screen:
■ If the active video device sends widescreen output to the projector, press
menu, go to Picture > Shape settings, and set Widescreen input to Yes.
1
See
in the following diagram.
■ If the video device sends standard output, set Widescreen input to No.
✎
If you show widescreen pictures on a wide projection screen, a standard
picture might not fit on the screen. One solution is to change the current
picture mode so it makes a smaller picture. Press menu, go to Picture >
Customize picture mode, and set Stretch to Reduced. See
following diagram.
User's Guide
Setting up
2
in the
33