LG NB4540 Owner's Manual page 24

24
With wired connection
1. Connect your LG TV to the unit by using an
optical cable.
3
2. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Optical)]
3. Turn on the unit by pressing 1 (Power) on the
remote control.
4. Select OPTICAL function by using FUNCTION
on the remote control or F on the unit until the
function is selected.
You can see "LG OPT" on the display window
if connecting normally between this unit and
your TV.
NB5540-NE.DGBRLLF_ENG.indd 24
Downloaded from www.Manualslib.com
Operating
manuals search engine
With wireless connection
1. Turn on the unit by pressing 1 (Power) on the
remote control.
2. Select LG TV function by using FUNCTION on
the remote control or F on the unit until the
function is selected.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
Optical
output] [ [LG Sound Sync (Wireless)]
cable
"PAIRED" appears on the display window for
about 3 seconds and then you can see "LG TV"
on the display window if connecting normally
between this unit and your TV.
,
Note
y If you turned off the unit directly by pressing
1 (Power), LG Sound Sync (Wireless) will
be disconnected. To use this function again,
you should reconnect the TV and the unit.
y Details of TV setting menu vary depending
on the manufacturers or models of your TV.
y The device with Bluetooth® wireless
technology will be disconnected, if Sound
Sync function is selected. "LG Bluetooth
Remote" app you've already connected is
disconnected either.
2014-07-23 11:58:22