Troubleshooting Guide; Specifications; Maintenance - Panasonic SH-FX65 Operating Instructions Manual

Wireless system and digital transmitter
Hide thumbs Also See for SH-FX65:
Table of Contents

Advertisement

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about
some of the check points, or if the solutions indicated in the table do not solve
the problem, consult your dealer for instructions.
On your home theater unit
≥ There is no link between the home theater unit
The wireless link
indicator (e.g. " [W1] "
and the wireless system. Turn the wireless
or an indicator) is
system off and then back on. Alternatively, turn
flashing.
the wireless system off, disconnect the AC
mains lead, and then reconnect it.
≥ Check that the home theater unit is turned on,
The wireless link
indicator (e.g. " [W1] "
and the wireless system is turned on.
≥ Ensure that the digital transmitter is fully
or an indicator) does
not light.
inserted into the slot of the home theater unit.

Maintenance

Clean this unit with a soft, dry cloth.
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the instructions that
came with the cloth.
- If you see this symbol-
Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact
your local authorities or dealer and ask for the
correct method of disposal.

Specifications

RF SECTION
Wireless module
Frequency range
Number of channels
AMPLIFIER SECTION
Output power
RMS output power
Surround Ch
Total RMS power
DIN output power
Surround Ch
Total DIN power
GENERAL
Power supply
[Australia[and[N.Z.]
[Others]
Power consumption
Dimensions (WtHtD)
SH-FX65T
SE-FX65
Mass
Operating temperature range
Operating humidity range
Power consumption in off mode
[Note]
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by a digital spectrum analyzer.
2.400 to 2.4835 GHz
125 W per channel (3 ≠), 1 kHz, 10 % THD
70 W per channel (3 ≠), 1 kHz, 1 % THD
AC 230 to 240 V, 50 Hz
AC 110 to 240 V, 50/60 Hz
SH-FX65T
SE-FX65
65 mmk52 mmk8.6 mm
165 mmk90 mmk164 mm
SH-FX65T
SE-FX65
r5 oC to r35 oC
5 % to 90 % RH (no condensation)
approx. 0.3 W
3
250 W
140 W
1.5 W
43 W
0.02 kg
0.655 kg

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents