Weekly Program Function
Before Asking Repair Work
Before asking repair work, please check the following.
Trouble
"ERROR" is displayed
when the minute digits are
entered.
The set data is not stored.
Program does not
function.
16
(EN)
If there is another TIMER No. which has the program of the same
time and same day, you cannot overlap the setting.
The stored programs are automatically sorted by the time. Check if
the data is stored in the other TIMER No.
Check if the time indication is not "– – : – –".
When the time is invalid, the program is also invalid.
Check the remote controller prohibition inside.
In that case, the program is invalid.
Possible Cause/Remedy