Sharp PN-L603W Operation Manual page 29

SNMP Setup SNMP V3
OSD Setup Display
Option
Projection
Option
WebSlides Auto Refresh
Setup Interval
(second)
Access
Password
Control
Change Conference
Passwords Control
Admin
Reset to Default
Firmware System
Upgrade Configuration
Firmware
Upgrade
Reboot System
Enable / Disable
Set whether SNMP is enabled or disabled.
Username
Set the user name for SNMP.
Auth Password (MD5) / Priv Password (DES)
Set each password.
Trap Destination
Set the trap destination.
Device Information / User-List / Connect info
Set whether each type of information is shown in the screen.
Font color / Font Size
Set the color and size of the screen font.
Screen Saver Settings
Set whether a screen saver is used.
If used, set the time until the screen saver activates.
OSD Menu Button
Set whether the toolbar is displayed.
Set the refresh interval for the screen displayed in the web browser.
Set the password for display of the screen in a web browser.
Disable: Do not use a password.
Use the same password as "Code": Use the same password as the passcode.
Use the following Code: Use the entered number as the password.
Change the password for Conference Control.
Change the password for Admin.
Return the wireless controller settings to their factory default state.
Export: You can save the settings.
Import: You can retrieve saved settings.
Update the firmware of the wireless controller.
Restart the wireless controller.
29
E