Sharp PN-L603W Operation Manual page 33

n Saving the screen in whiteboard as an image
The handwritten data in Direct Drawing mode can be saved as an image file (JPEG) in a USB flash drive connected to the
wireless controller.
1. Connect the USB flash drive to the wireless controller.
2. Touch "Save" ( ) on the toolbar.
The file is saved with the file name "B0000001.jpg" in the "Annotation" folder of the USB flash drive.
(The number in the file name is successively incremented up to 9999999, after which it returns to 0000001.)
Caution
• Set the correct date and time in the monitor. (See operation manual.)
The monitor date and time is used for the file time stamp.
n Displaying a saved image
Caution
• If data already exists in Direct Drawing mode, the original data will be lost when the new image is displayed.
1. Connect the USB flash drive to the wireless controller. (See the description above.)
2. Touch "Open" ( ) on the toolbar.
3. Touch the image to be displayed.
33
E