Exhaust Filter Maintenance; Light Bulb Replacement - Kenmore 592.30414 Use & Care Manual

EXHAUST FILTER MAINTENANCE

Note : Inspect HEPA filter regularly for accumulation of dust and debris.
Replace if necessary. Based on frequent vacuum use, the HEPA
exhaust filter should be replaced every 6 months for best vacuuming
performance.
1. Remove Dust Bin and Motor Filter Case as previously described in this Use &
Care Guide.
2. Grasp HEPA filter by one of the raised plastic fins and lift up and out.
3. Observe the order shown below when reassembling the filters.
filter cover
filter case
(Sponge filter+micro filter)
HEPA filter
body grille

LIGHT BULB REPLACEMENT

WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from vacuum
cleaner suddenly starting.
1. Using a screwdriver, remove 2
screws as shown and lift off the lens.
2. Remove the bulb from the socket by
grasping bulb and pulling straight out.
3. Install the new bulb by pushing it
gently into the socket until the bulb
snaps into place.
TO REPLACE LIGHT BULB
4. Reposition lens and secure with 2
screws.
14