Instructions - Kenmore 592.30414 Use & Care Manual

IMPORTANT SAFETY INSTRUCTIONS
Using improper voltage may result
in damage to the motor and
possible injury to the user. Proper
voltage is listed on the cleaner
plate.
SAVE THESE INSTRUCTIONS
Proper assembly and safe use of your vacuum cleaner are your
responsibilities. Your vacuum cleaner is intended only for Household
use. Read this Use & Care Guide carefully for important use and safety
information. This guide contains safety statements under warning and
caution symbols. Please pay special attention to these boxes and follow any
instructions given.
Your cleaner contains a thermal protective device to shut off the motor to
avoid overheating. If this happens, turn switch off and unplug the cleaner.
Inspect the exhaust, inlet, and filters for any blockage. Empty the dust bin
and clean filters. After approximately 1 hour the motor will be cooled and the
vacuum will be ready to use.
Note : The cleaner must remain at least 1 hour for cooling.
CAUTION : Even though the main motor is shutted off, the power nozzle
brushroll could not stop. Turn off the power nozzle brushroll switch
before inspect the cleaner. After approximately 1 hour the motor will
be cooled and the vacuum will be ready to use.
Note : The cleaner must remain unplugged at least 1 hour for cooling.
WARNING : The cords, wires, and/
or cables supplied with this product
contains chemicals, including
lead or lead compounds, known
to the state of California to cause
cancer and birth defects or other
reproductive harm. Wash hands
after using.
5