Advertisement
3
3
Shake the appliance horizontally
3 to 4 times.
●
Shake the appliance gently without tilting
it.
4
4
Remove the water supply tank
from the main unit.
5
5
Discard the water from
the water outlet while
pushing the inclination
switch on the bottom
of the main unit.
●
Return the appliance to a
flat position and repeat the
step above to times.
There is a risk that water
will spill from the water
supply tank attachment part
when the appliance is tilted
too much.
6
6
Repeat the steps 2 to 5 above 2 to 3 times.
7
7
Wipe off the water on the main unit and the
water supply tank.
Even after draining the water, some water remains in the
appliance. This does not cause any sanitary problems
since the water is boiled when used the next time.
Cleaning the appliance
●
Wipe the appliance with a cloth moistened with soapy
water.
●
Never use alcohol, thinner, benzine, enamel remover, etc.
Doing so may result in malfunction or part cracks or
discoloration.
0
EH-SA60_CH.indb
40
Water supply tank
attachment part
2011/06/29
18:17:59
Advertisement
