Advertisement
6
6
Next, Press the "停止/开
始" (stop/start) switch
within 10 seconds.
The "蒸汽" (steam) lamp (red)
turns on.
●
If you do not press the "停止/
开始" (stop/start) switch within
10 seconds after pressing the
"切换" (mode change) switch,
the "细微水离子" (nanoe™)
lamp (blue) will blink. Now,
Repeat the procedure from
Step .
●
A whizzing may be heard.
This is the sound of electric
discharge which is normal.
●
Move the cover to adjust
the nozzle angle.
EH-SA60_CH.indb
32
●
To open/close the cover
or to adjust the angle,
hold the left and right
indented parts and adjust.
2011/06/29
18:17:57
Advertisement
