Sending A Phone Flash - Motorola 9505 User Manual

r

Sending a Phone Flash

Satellite Mode
Cellular Mode
(GSM 900/1800)
(GSM 900)
Cellular Mode
(TDMA 800/1900)
(CDMA 1900)
(CDMA/AMPS)
66 Using In-Call Features
This feature only applies to TDMA or CDMA cellular
mode.
Many TDMA and CDMA cellular network features
(for example, call waiting, call holding, call
forwarding) require you to send a "phone flash"
over the air during a call to access them. This is
similar to when you press the switch hook on your
conventional phone in your home or office to switch
between calls. The phone flash alerts the network
that you want to use a particular network feature.
Your service provider will provide you with the
appropriate codes to send with the phone flash for
the features to which you have subscribed.
To send a phone flash:
M
1. Press
Flash Options
O
2. Press
3. Enter the access code for the feature you
want to access, if necessary, and then
O
press
or
C
Press
while you are in a call. You will see
followed by
Send Flash?
. You will see
to send the flash.
to cancel the flash.
Select?
.
.