Motorola MOTONAV TN500 Series Installation Manual page 13

4 Locate the professional installation cable which is
shown here.
5 Connect the car kit to the MOTONAV device
cradle as follows:
a Connect cable connector L to the vehicle
integration kit connector B (shown on page
5).
b Connect cable connector J to the cradle
connector N.
M
c Connect cable connector K to the cradle
connector M.
6 Before peeling tape from mounting arm, place
mount and cradle with cables in desired location
on dashboard to confirm they do not interfere
with driver vision or airbags.
mount and connect the MOTONAV device
N
11