Installation - Mitsubishi Electric GB-50ADA-A Installation Instructions Manual

5-3. Installation

• Leave enough space around the unit as shown in the figure below to allow for an installation/uninstalltaion of the cover and
wiring.
• Screw down the cover with M4 screws as shown in the figure below.
Be sure to screw down the four corners to prevent it from falling.
• Install on the metal control panel whose effective depth is 105 mm (4-
Properly install the unit on a stable, load-bearing surface.
Unit installed on an unstable surface may fall and cause injury.
Important :
GB-50ADA is not water-proof.
Be sure to install it inside the control panel.
13
20 ( / )
16
Serial number :
Ver. :
DB No. :
M-NET
* Refer to section 3 Specifications
/ in.) or more.
3
16
Error
CN5 CN4
LINK/ACT LAN
I/O Serial
for the product dimensions and weight.
To reduce the risk of fire and malfunctions and to keep the
unit from falling, do not install the unit where the unit may
receive vibration or mechanical shock.
Be sure to install it inside the control panel. Be sure to
install in an area where there is no possibility of dew
condensation.
- 15 -
13
20 ( / )
16
Unit: mm (in.)