Pc Card Problems; Pc Card Problems; Power Management Problems (For Windows); Power Management Problems (For Windows) - Motorola L3391 Owner's Manual

PC Card Problems

The PC Card does not work.
l Make sure that the PC Card is correctly seated.
l If the card requires an IRQ (interrupt request), make sure that there is
one available.
l The PC Card may be attempting to use a COM port in a manner that
conflicts with the COM port being used by another device. Try running
the SCU program to change the COM port setting. If your PC Card uses
COM1, set COM1 as Disabled. If your PC Card uses COM3, set COM3
as Disabled. If your PC Card uses COM4, set COM4 at Disabled.
WARNING: COM3 is reserved for use by the touchscreen, do not disable it.
The following table is the default settings:
COM Port
COM1 (available)
COM4 (reserve for
Wireless Modem )
COM3 (reserved for
touchscreen only)
The PC Card stops communicating properly.
l The application may have been reset when the computer is turned off
or in Standby mode. Exit and restart the application.

Power Management Problems (for Windows)

The computer does not enter Standby or Suspend mode
automatically.
l If you have a connection to another computer, the computer does not
enter Standby or Suspend mode if the connection is actively in use.
Troubleshooting
I/O (input/output) Port
3F8
2E8
3E8
IRQ (Interrupt Request)
IRQ4
IRQ5
IRQ3
8-11