When and How to Use the SCU Program
When to Use
You need to run the SCU program when:
l You see an error message on the screen requesting you to run Setup.
l You want to restore the factory default settings.
l You want to modify some specific settings according to the hardware.
l You want to modify some specific settings to optimize system
performance.
Starting SCU
NOTES:
The Setup screens shown in this chapter are for your reference only. The actual
l
items or settings on your computer may differ.
The Setup program may have been updated after the publication of this manual.
l
The settings you select in your operating system might override similar settings in
l
Setup.
F2
To run SCU, press
screen during system startup. The prompt shows up on the screen for
only a few seconds. You must press
as shown next.
5-2
when the prompt appears in the left corner of the
F2
quickly. The SCU menu appears
Setup Configuration Utility