Table of Contents
Advertisement
SPECIFICATIONS
Operating Frequency
Range
Access Method
Signaling Rate
Modulation Type
Carrier to Interference
(C/I)
Receiver Sensitivity
Operating Range
(All Weather)
Transmitter Power
DC Power measured at
DC converter
Interface
Protocols Used by
Canopy
Protocols Supported by
Canopy
Software Upgrade Path
Network Management
Temperature
Dimensions
Weight
U-NII: 5.25 to 5.35 GHz and 5.725 to 5.825 GHz
ISM: 5.725 to 5.850 GHz
Time Division Multiple Access (TDMA)
10 Mbps or 20 Mbps
High Index 2-level or 4-level Frequency Shift Keying (FSK)
(Optimized for interference rejection)
3dB nominal for 10 Mbps
-4
-83 dBm 10
BER for 10 Mbps, -77 dBm 10
Up to 2 miles (3.6 km) with integrated antenna. Up to 35 miles (56 km)
with installed passive reflectors.
Meets FCC U-NII/ISM and IC LELAN ERP Limit
0.34 A @ 24 VDC (8.2 watts) typical
0.38 A @ 24 VDC (9.1 watts) max (long cable runs, high ambient
temperature, high transmit ratio (set by downlink percentage))
10/100 BaseT, half/full duplex
Rate auto negotiated (802.3 compliant)
IPV4, UDP, TCP, ICMP, Telnet,
HTTP, FTP, SNMP, DES
Switched Layer 2 Transport with support for all common Ethernet
protocols including IPV6, NetBIOS, DHCP, IPX, etc.
Remotely downloaded into FLASH via RF link
HTTP, TELNET, FTP, SNMP
-40°C to +55°C (-40ºF - +131ºF)
11.75" H x 3.4" W x 3.4" D (29.9 cm H x 8.6 cm W x 8.6 cm D)
1 lb. (.45kg)
-4
BER for 20 Mbps
Advertisement
Table of Contents
