Wall-Mounting Procedure - Panasonic UB-5320 Operating Instructions Manual

■ Wall-mounting procedure

1
Confirm that the wall is strong enough to support the weight of the electronic board.
Caution
The wall must be capable of supporting at least
1,716 N [175 kgf (386 lbs.)] for UB-5320
1,814 N [185 kgf (408 lbs.)] for UB-5820.
2
Tape the Wall-mounting template on the wall.
• Do not use the template included in the wall-mounting kit (KX-B063), but rather the one included with
the electronic board (UB-5320 / UB-5820).
• When taping the template on the wall, make sure it is level.
3 1) Drill holes in the wall for the wall-mounting fixtures (8 holes total).
• Holes on the wall-mounting fixture are 7 mm (
2) After removing the wall-mounting template, attach the wall-mounting fixtures
with the appropriate wall-mounting hardware (two screws in each fixture).
Wall-mounting
hardware*
1
Wall-mounting
hardware*
* This hardware must be locally procured, it is not included in the kit.
• Refer to the section "Attaching the wall-mounting fixtures" on page 44 for drilling in the wall and attaching
the mounting fixtures.
4
Assemble and install the electronic board.
Refer to page 27.
Wall-mounting template
(provided with UB-5320 / UB-5820)
1
Wall-mounting
fixture L
Wall-mounting
fixture L
Optional Wall-mounting Kit (KX-B063)
1
/ " ) in diameter.
4
(See page 26.)
2
Wall-mounting
fixture R
Center of the
electronic board
43