Networking - Routing - Motorola BR700 User Manual

CONFIGURATION

Networking - Routing

You can define up to 20 static routes that specify the Network
Destination, Subnet Mask, Gateway, Interface, and Metric. You
configure the Network Routing Table here.
RIP (Routing Information Protocol) versions 1 and 2 are routing
protocols that are part of the TCP/IP protocol standard. RIP
dynamically determines a route based on the smallest hop count
between source and destination. To access the screen, click
NETWORKING > ROUTING. Click APPLY to save your settings or
CANCEL to cancel changes.
Field
RIPv1 Receive
RIPv2 Receive
RIPv1 Transmit
SECTION 3, CONFIGURATION
Description
Enables or disables RIPv1 Receive.
The default is disabled.
Enables or disables RIPv2 Receive.
The default is disabled.
Enables or disables RIPv1 Transmit.
The default is disabled.
SECTION 3
3-19