Computer To Wps870G Connection - Motorola WPS870G User Manual

User Guide
With the other end of the same Ethernet cable, plug it into the LAN port of your
2
WPS870G.
Plug in the power plug to the WPS870G and the other end into an electric outlet. The
3
LAN LED illuminates when successfully connected.

Computer to WPS870G Connection

If you are connecting the WPS870G directly to your computer, that computer must first be
equipped with an Ethernet adapter card. Use a crossover Ethernet cable for this procedure;
a crossover cable is not supplied.
To connect the WPS870G to your computer:
Power
To power
Using the crossover Ethernet cable, take one end and plug it into the LAN Ethernet port
1
on the back of your computer. If you already have an Ethernet cable plugged into the
port, you can temporarily remove it for this procedure. Remember to replace the cable
after this set up is completed.
Plug the other end of the same crossover Ethernet cable into the LAN port of your
2
WPS870G.
Plug in the power plug to the WPS870G and the other end into an electric outlet. The
3
LAN LED illuminates when successfully connected.
PAGE 11
crossover Ethernet cable
Reset
Parallel USB LAN
WPS870G
WPS870G
Computer