Changing The Ipp Port Settings; Using Ipp Printers - Motorola WPS870G User Manual

WPS870G

Changing the IPP Port Settings

After the IPP port is created, you can access the Configure IPP Port window using the
Windows Port Settings button:
Open the Printers folder by clicking Start > Settings > Printers.
1
Right-click the IPP Printer and select Properties.
2
Locate and click Port Settings (Details or Port tab, depending on your version of
3
Windows). There are 2 settings - Retry Interval and Retry Count – which can be
adjusted if you have problems connecting to the IPP Server.
– Retry Interval sets the time interval (in seconds) between connection attempts.
Increase this number if you have a poor connection or the remote server is very
busy.
– Retry Count sets how many connection attempts will be made. Increase this
number if you have a poor connection or the remote server is very busy.

Using IPP Printers

The IPP Printer functions like any other Windows printer. When printing from an application,
select the IPP Printer.
If the IPP Server is not on your network, your Internet connection needs to be active.
If using the supplied IPP Client software, you can use the Query IPP Printer program
installed with Add IPP Port to check the availability of the remote IPP Server.
An IPP Server may be unavailable for any of the following reasons:
It is powered off.
A printer problem has caused the IPP Server to cease responding, and a restart
(reboot) is required.
The Server's IP address has changed.
The Internet connection for the IPP Server is down.
Network congestion causes the connection attempt to time out.
If using the supplied IPP Client software, there are two settings - Retry Interval and Retry
Count - which can be adjusted if you have problems connecting to the IPP Server.
See Changing the IPP Port Settings for details.
User Guide
PAGE 70