1 OVERVIEW
Wired Ethernet LAN
You will need to install the Ethernet network interface card
for each computer on the 10/100Base-T Ethernet LAN. Because the SVG2500
Ethernet port supports
cable to connect a hub, switch, or computer. Use category 5 cabling for all Ethernet
connections.
Figure 1-3 — Sample Ethernet to Computer Connection
The physical wiring arrangement has no connection to the logical network allocation
of IP addresses.
A wired Ethernet LAN with more than four computers requires one or more
switches, or
•
Connect a hub or switch to any Ethernet port on the SVG2500
•
Use Ethernet hubs, switches, or routers to connect up to 245 computers to the
SVG2500
auto-MDIX,
routers.
You can do the following:
you can use straight-through or cross-over
12
(NIC)
and
driver
software
hubs,