Connecting Your A/V Receiver, Vcr And Standard Tv - Motorola HDT100 User Manual

Connecting your A/V Receiver, VCR and Standard TV

1
Connect an optical digital audio cable to the
the HDT100 and the
OPTICAL
2
Connect a video cable to the
the / connector on the A/V receiver.
CABLE TV VIDEO
If your equipment supports it, S-Video connections may be used in
place of the standard composite video connections. In most cases,
S-Video offers a higher level of standard definition video quality than
composite video.
3
Connect a stereo audio cable to the
connectors on the A/V receiver and the
connectors on the stereo VCR.
4
Connect a stereo audio cable to the
connectors on the stereo VCR and the
connectors on the A/V receiver.
5
Connect a video cable to the
VCR and the
VIDEO VCR OUT
6
Connect a video cable to the
VCR and the
VIDEO VCR IN
7
Connect a video cable to the
and the /
TV MONITOR OUTPUT VIDEO
When using the Digital Audio output (
baseband audio connections to the A/V receiver are not needed.
OPTICAL
input connector on the A/V receiver.
connector on the HDT100 and
VIDEO
VCR AUDIO OUT R
INPUT AUDIO R
OUTPUT AUDIO OUT R
VCR AUDIO IN R
connector on the stereo
INPUT VIDEO
connector on the A/V receiver.
connector on the stereo
OUTPUT VIDEO
connector on the A/V receiver.
connector on the stereo TV
INPUT VIDEO
connector on the A/V receiver.
or ), the left / right
OPTICAL SPDIF
37
connector on
and
L
and
L
and
L
and
L