Table of Contents
Advertisement
Problem
Possible Solution
After installing the
Add the missing channels manually. See "Adding a
HDT100 and running
Channel" in the On-Screen Menu section.
Auto Scan, not all the
You may have to reposition your antenna to receive all
available channels
the local channels, especially if different transmit
have been added
towers are being used by the networks. For more
information, log on to the following web site:
http://www.antennaweb.org/
Cannot lock on a
Verify the channel number is correct.
signal when manually
Check the antenna and make sure it is aligned to the
adding a channel
correct direction.
Check the signal's strength and quality. Press
display the i-Banner and review the color bars at the
bottom of the window. If any of the bars are red, adjust
your antenna and try again.
No Closed Captions
Verify that the channel you are watching carries closed
captioning.
Cannot receive
You may have to reposition your antenna. Consult the
channels after
following web site:
changing the
http://www.antennaweb.org/
HDT100's location
On-Screen Error Messages
Bad Signal
Check to be sure that the antenna cable is connected
properly (hand-tighten if necessary).
Check the antenna and make sure it is aligned to the
correct direction.
Scrambled Channel
The program you are watching is scrambled by the TV
station. The program cannot be decoded by the
HDT100.
42
to
INFO
Advertisement
Table of Contents
