Autodome Series; Tc8770 Switcher Follower Series, Tc8770Sf, Tc8770Sg, Tc8770Ld, Tc8770Lg Function Modules; Tc8770I Interconnect Panel; Ltc 8785 Series Code Converters - Philips LTC 8100 Series Installation Instructions Manual

CPU bay.
5.9 LTC 8557 Series Keyboard Extension Kits
Interface kit used to remote LTC 8550/00, LTC 8551/00, LTC
8553/00, LTC 8554/00, or LTC 8555/00 keyboards up to 1.6 km
(5000 feet) away from main CPU bay. Customer supplied 24 gage
shielded-twisted pair (Belden 9841 or equivalent) required between
main CPU bay site and keyboard site. Kit provides two junction
boxes, interface cable, and appropriate keyboard power supply.
5.10 LTC 8560 Series Receiver/Driver Units
Decodes data transmitted from the LTC 8300 Series Signal
Distribution outputs for camera site control of Pan/Tilt, Zoom
Lens, pre-positions, and auxiliaries. Unit contains integral local
test feature, auto-pan or random scanning, and is available in
several input and output drive voltage versions.

5.11 AutoDome Series

Integral camera, high speed pan/tilt, zoom lens, and receiver/driver
system in compact dome enclosure. Available in monochrome or
color camera models. Various enclosure mounting options are
available for indoor and outdoor applications.
5.12 LTC 8569, LTC 8570, LTC 8571, LTC 8572
Series Code Merger Unit
Control code merger and line driver unit used to combine
control code from two systems (up to four with LTC 8570
version) for communicating to Receiver/Drivers, Switcher
Followers, and satellite systems. Provides 32 or 64 separate
outputs capable of driving up to 256 or 512 remote devices.
Either "star" or "daisy chain" wiring configurations may be
used. Unit will accept signal input either from Allegiant main
CPU bay, LTC 8568 output, or an output from another code
merger unit. Multiple units may be cascaded to obtain
additional outputs.
5.13 TC8770 Switcher Follower Series, TC8770SF,
TC8770SG, TC8770LD, TC8770LG Function Modules
Accessory unit which provides relay contact closures or LED driver
outputs corresponding to cameras displayed on system monitors.
The TC8770 may be configured to follow non-alarmed video,
alarmed video, or both. TC8770 card cage holds any combination
of up to 8 TC8770SF, TC8770SG, TC8770LD, or TC8770LG
modules. Each TC8770SF or TC8770SG type module contains
16 relay contact outputs. A single TC8770LD or TC8770LG type
module drives up to 64 low current type LEDs.

5.14 TC8770I Interconnect Panel

Accessory for the TC8770 Switcher Follower which provides
convenient screw terminal interface for external connections. Mates
to ribbon cables supplied with TC8770 Series function modules.
5.15 LTC 8712 Series CONSOLE
Port Expander Units
The LTC 8712 Series port expander interfaces to the RS-232
CONSOLE port of an Allegiant system to permit up to 4 external
PCs, logging printers, or other computing devices to be connected
to the system. This permits multiple PCs or computing devices to
communicate with a single Allegiant system.
5.16 LTC 8780 Series Data Converter Units
The LTC 8780 Series convert the biphase control code
generated by Allegiant series matrix switchers and the
LTC 5135 Series controller/followers into standard RS-232,
and converts RS-232 back to biphase code. This provides the
capability of transmitting the biphase control code over
conventional RS-232 transmission media (phone modems,
16