Alarm Activated Pre-Position; Sample Alarm Responses; Basic Mode; Auto-Build Mode - Philips LTC 8100 Series Installation Instructions Manual

13.4

Alarm Activated Pre-Position

Alarm activated pre-position capability also exists in each of the
three alarm response modes. This enables a pan/tilt/zoom
equipped camera to automatically position itself to a
preprogrammed scene as a result of an alarm signal. Note that the
pan/tilt and zoom on the camera must have the necessary options
for pre-position control. The system default is to activate pre-
position #16 of the system camera receiving an alarm. Using the
optional Master Control Software for Windows package or the
LTC 8850/00 Graphical User Interface Software, the response to
alarms can be configured as required by the user.

13.5 Sample Alarm Responses

13.5.1 Basic Mode

In the Basic alarm response mode, cameras are individually armed
for each alarm monitor.
MONITOR MONITOR
1 2
Alarm Status Alarm Station Display
1st Alarm Video associated with 1st alarm is displayed
on any or all appropriately armed monitors.
2nd Alarm Video associated with 2nd alarm is displayed
on any or all appropriately armed monitors.
3rd Alarm Video associated with 3rd alarm is displayed
on any or all appropriately armed monitors.
Monitors and their respectively armed cameras are programmed
individually.
Multiple alarms on monitors are sequenced automatically.
Alarmed video remains on monitors for duration of alarm
input signal.

13.5.2 Auto-build Mode

In the Auto-Build alarm response mode, alarms "build-up" on
armed monitors as new alarms are received.
1
9
MONITOR
1
Alarm Status
1st Alarm
2nd Alarm
3rd Alarm
MONITOR
8th Alarm
6
9th Alarm
Any number of monitors may be armed.
Multiple alarms on monitors are sequenced automatically.
Alarm video remains on monitors for duration of alarm input
signal.
35
2
MONITOR
2
Alarm Station Display
Video associated with 1st alarm is displayed
on monitor # 1 (if armed).
Video associated with 2nd alarm is displayed
on monitor # 2 (if armed).
Video associated with 3rd alarm is displayed
on monitor # 3 (if armed).
(C o n t i n u e s e q u e n c e)
Video associated with 8th alarm is displayed
on monitor # 8 (if armed).
Video associated with 9th alarm is
sequenced with video of 1st alarm on
monitor # 1.
8
MONITOR
6