D-Link mydlink DNR-202L Quick Install Manual page 3

Installation - Windows Only
Step 1:
Connect the included Ethernet cable to the Ethernet port located on the rear
panel of the DNR-202L and attach it to your network.
Step 2:
Connect the power supply to the power connector located on the rear panel of
the DNR-202L and connect it to a wall outlet or power strip. Power is confirmed
when the blue LED Power Indicator located on the front panel is lit.
Step 3:
Open your web browser and go to http://www.mydlink.com/support. Then,
click the Storage tab and select your product to download the Setup Wizard.
Step 4:
Click the Start button to start the wizard and follow the instructions to set up
your NVR. If you want to add cameras to your previously-configured DNR-202L,
click the Skip button.
Note: Ensure that cameras have been installed on the network before initiating the
DNR-202L setup.
3