HP EliteDesk 800 G2 Desktop Mini Maintenance And Service Manual page 54
Hide thumbs
Also See for EliteDesk 800 G2 Desktop Mini:
- Maintenance and service manual (154 pages) ,
- Hardware reference manual (52 pages) ,
- Disassembly instructions manual (13 pages)
Table of Contents
Advertisement
7.
Lift the processor (3) straight up and remove it.
CAUTION:
them could cause irreparable damage. Once pins are damaged it may be necessary to replace the
system board.
The heat sink must be installed within 24 hours of installing the processor to prevent damage to the
processor's solder connections.
Reverse the removal procedure to install a new processor.
NOTE:
After installing a new processor onto the system board, update the system ROM to ensure that the
latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the Web at:
http://h18000.www1.hp.com/support/files.
46
Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis
Do NOT handle the pins in the processor socket. These pins are very fragile and handling
Hide quick links:
Advertisement
Table of Contents
