C.fn3: Exposure - Canon EOS-1 D X Mark II Instruction Manual

C.Fn3: Exposure

Restrict shooting modes
You can restrict the shooting modes selectable with the <W>
button.
Select a shooting mode <d>/<f>/<a>/<s>/<BULB>/<w1>/
<w2>/<w3>, then press <0> to add a checkmark <X>. Then select
[OK] to register the setting.
The restricted shooting mode settings are not registered to <w1>,
<w2>, or <w3>.
You cannot remove the [X] mark for all eight modes.
Restrict metering modes
You can restrict the metering modes selectable with the <Q>
button.
Select a metering mode <q> <w> <r> <e>, then press <0> to
add a checkmark <X>. Then select [OK] to register the setting.
You cannot remove the [X] mark for all four modes.
Metering used in manual exposure
You can set the metering mode to be used in the <a> shooting mode.
Xq: Specified metering mode
The currently-set metering mode is used.
q: Evaluative metering
w: Partial metering
r: Spot metering
e: Center-weighted average metering
If <q> <w> <r> <e> is set, pressing the <Q> button during
manual exposure shooting will not select the metering mode.
3 Custom Function Settings
C.Fn3
C.Fn3
C.Fn3
427