Table of Contents
Advertisement
Troubleshooting Guide
The manually set ISO speed changes when
switching to movie shooting.
ISO speed will be set according to the setting of [Range for stills] for
[z2:ISO speed settings] (p.166) during viewfinder shooting and Live
View shooting, or the setting of [Range for movies] and [Range for
H] (p.330) during movie shooting.
The exposure changes during movie shooting.
If you change the shutter speed or aperture during movie shooting, the
changes in the exposure may be recorded.
Shooting a few test movies is recommended if you intend to perform
zooming during movie shooting. Zooming during movie shooting may
result in recoding images with changes in exposure or operation
sound, or images may be out of focus.
The image flickers or horizontal stripes
appear during movie shooting.
Flickering, horizontal stripes (noise), or irregular exposures can be
caused by fluorescent lighting, LED lighting, or other light sources
during movie shooting. Also, changes in the exposure (brightness) or
color tone may be recorded. In the <s> or <a> mode, a slow
shutter speed may reduce the problem.
The subject looks distorted during movie shooting.
If you move the camera to the left or right (panning) or shoot a moving
subject, the image may look distorted.
The movie does not record the sound.
High Frame Rate movies do not record sound.
512
Advertisement
Table of Contents
