Brother HL-L5000D User Manual page 116

For more information about how to enter text, see the User's Guide.
7. Press [Infrastructure].
8. Press a or b to display the Authentication Method you want.
9. Press the Authentication Method you want.
10. Do one of the following:
• If you selected the [Open System] option, press either [None] or [WEP].
If you selected the [WEP] option for Encryption Type, enter the WEP key, and then press [OK].
• If you selected the [Shared Key] option, enter the WEP key, and then press [OK].
• If you selected the [WPA/WPA2-PSK] option, press either [TKIP+AES] or [AES] for Encryption Type.
Enter the WPA key, and then press [OK].
• For more information about how to enter text, see the User's Guide.
• Your Brother machine supports the use of the first WEP key only.
11. To apply the settings, press [Yes]. To cancel, press [No].
12. The machine will attempt to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at
device.
Related Information
• Additional Methods of Configuring Your Brother Machine for a Wireless Network
• I Cannot Complete the Wireless Network Setup Configuration
• How to Enter Text on Your Brother Machine
• Wireless LAN Report Error Codes
support.brother.com to install drivers and software necessary for operating your
111