Brother HL-L5000D User Manual page 339

Level 2 Level 3
WLAN TCP/IP
Setup Wizard
WLAN
Assistant
WPS
WPS w/ PIN
Code
WLAN Status
MAC Address
Set to
Default
WLAN Enable
Wi-Fi Direct Push Button
PIN Code
Manual
Group Owner
Device Info.
Status Info.
I/F Enable
NFC -
Level 4 Level 5
WINS Server Secondary Specify the IP address of the secondary
DNS Server Primary
Secondary Specify the secondary DNS server's IP
IP Boot Tries -
APIPA -
IPv6 -
- -
- -
- -
- -
Status -
Signal -
SSID -
Comm. Mode -
- -
- -
- -
- -
- -
- -
- -
Device Name
-
SSID -
IP Address -
Status -
Signal -
- -
- -
Descriptions
WINS server.
Specify the primary DNS server's IP
address.
address.
Specify the number of attempts the
machine will try to obtain an IP address
when the Boot Method is set to any
setting except Static.
Allocate the IP address from the link-local
address range automatically
Enable or disable the IPv6 protocol.
Configure the wireless network settings
using the setup wizard.
Configure your wireless network settings
using the Brother CD-ROM.
Configure your wireless network settings
using the one-button push method.
Configure the wireless network settings
using WPS with a PIN code.
Display the wireless Ethernet link status.
Display the signal condition.
Display SSID.
Display the current Communication
Mode.
Display the MAC address of the machine.
Restore wireless network settings of your
machine to the factory settings.
Turn the wireless interface on or off.
Configure your Wi-Fi Direct network
settings using the one-button push
method quickly.
Configure your Wi-Fi Direct network
settings using WPS with a PIN code
quickly.
Configure your Wi-Fi Direct network
settings manually.
Set your machine as the Group Owner.
View your machine's device name.
Display the Group Owner's SSID.
Display your machine's IP Address.
Display the Wi-Fi Direct network status.
Display the current Wi-Fi Direct network
signal strength.
Enable or disable the Wi-Fi Direct
connection.
Turn the NFC function on or off.
1
.
334