Simple Settings Function - Panasonic U-72MF1U9 Service Manual

3. Timer Remote Controller

3-15. Simple Settings Function

• This allows the filter lifetime, operating mode prior-
ity change, central control address, and other set-
tings to be made for an individual or group-control
indoor unit to which the remote controller used for
simple settings is connected.
When this function is engaged, operation stops at
the individual or group-control indoor unit to which
the remote controller for simple settings is con-
nected.
<Procedure>
Press and hold the
simultaneously for 4 seconds or longer.
" ," unit No. "
group control), item code "
" " are displayed blinking on the remote
controller LCD display. At this time, the indoor unit
fan (or all indoor unit fans in the case of group
control) begins operating.
If group control is in effect, press the
button and select the address (unit No.) of the
indoor unit to set. At this time, the fan at the
indoor unit begins operating.
* If unit No. " " is displayed, the same setting
will be made for all indoor units.
Press the temperature setting
buttons to select the item code to change.
Press the timer time
the desired setting data.
* For item codes and setting data, refer to the
following page.
Press the button.
(The display stops blinking and remains lit, and
setting is completed.)
Press the button to return to normal remote
controller display.
buttons
and
" (or " " in the case of
," and settings data
/
/ buttons to select
7
1 6
2 - 31
Remote Control Functions
2
3
4
5
1
2
3
4
5
6
7