Panasonic U-72MF1U9 Service Manual page 56

3. Timer Remote Controller
Item
code
T10 terminal switching
Automatic drain pump
Ventilation fan operation
Wired remote controller sensor
"Operation change control in
progress" display
OFF reminder function for
when weekly timer is used
1
Discharge temperature control
2
Heat exchanger temperature
for cold air discharge
(Heat exchanger control point
for control to prevent cold air)
3
Fan output switching
4
Drain pump delayed start time
5
Humidifier setting
6
Flap operation mode
7
Item
No.
0000
0001
0002
0000 No forced operation
0001 Forced operation for 1 minute
operation
0060 Continuous operation
0000 None
0001 Ventilation fan operated by remote controller.
0000 Not used. (Body sensor is used.)
0001 Remote control sensor is used.
0000 Normal (displayed)
0001 Not displayed
0000 None
0001 Only stop time setting is enabled.
0000 Discharge temperature control OFF
0001 Discharge temperature control ON
0000 RAP valve control OFF
RAP valve
0001 RAP valve control ON
0013
0014
0025
0026
0000
0001 Fan mode operation output
0000 No delayed start
0001 1 sec. delayed start
0002 2 sec. delayed start
0058 58 sec. delayed start
0059 59 sec. delayed start
0060 60 sec. delayed start
0000 Humidifier output OFF. Drain pump stopped.
0001 Humidifier output ON. Drain pump operates.
0002
0003 Humidifier output ON. Drain pump stopped.
0000 Standard setting
0001
Setting data
Description
Normal (Used as optional relay PCB or JEMA
standard HA terminal.)
Used for OFF reminder
Fire prevention input
Control temperature 55°F
Control temperature 57°F
Control temperature 77°F
Control temperature 78°F
Output linked with fan. (ON when indoor unit fan is
operating.)
Humidifier output ON. Drain pump operates for 1 minute
when total humidifier operating time reaches 60 minutes.
Draft reduction mode (Flap swing lower-limit position is
upwards.)
2 - 36
Remote Control Functions