Siemens Gigaset A58h Manual page 14

First steps
Area codes
To return calls using the incoming caller ID list (
code ("local area code") must be stored. If your phone is in a "multiple area code"
area, the extra codes for this area must also be stored.
Local Area Code
¢
§Menu§
~
§OK§
a
Extra Codes
¢
§Menu§
§OK§
§OK§
a
Repeat the above steps until all extra area codes for your area have been entered.
A maximum of 5 extra codes can be stored.
Display in idle status
Once the phone is registered and the time set,
the idle display is shown, as in this example. If
the answering machine (depending on the
base station) is activated, the answering
machine icon × will also be displayed in the
header.
Your phone is now ready to use.
12
¢ ¢
Settings Base
§OK§
Select and press
Enter local area code.
Press the display key.
Press and hold (idle status).
¢ ¢
Settings Base
§OK§
Select and press
The message Enter extra area code? displays.
Press the display key
Entry
The message
first extra area code to be assigned.
Press the display key.
Press and hold (idle status).
¢
page 24), your phone's area
Local Area Code
.
Extra Codes
.
No. 1 displays, with an input field below. Type the
Ð V
Þ
10.01.09 07:15a
Menu