Initial Led Display - Mitsubishi Electric PUHY-P200 Service Handbook

[9-1 LED Status Indicators ]
9-1-2

Initial LED Display

From power on until the completion of initial settings, the following information will be displayed on the monitor screen.
(Displays No. 1 through No. 4 in order repeatedly.)
No Item
Software version
1
Refrigerant type
2
Model and capacity
3
Communication address
4
After the initial settings have been completed, the information on these items can be checked by making the switch setting
that corresponds to No. 517 in the LED display table.
Only item No. 1 "Software Version" appears on the display if there is a wiring failure between the control board and the trans-
mission line power supply board or if the circuit board has failed.
How to convert HP capacity to Model name
HP capacity is the capacity of outdoor unit that is shown on LED display at initial setting.
Please refer to the following table to covert from HP capacity to Model name.
HP
8
10
12
14
16
18
20
22
24
26
28
30
HWE14040
Display
Model HP
P200 32
P250 34
P300 36
P350 38
P400 40
P450 42
P500 44
P550 46
P600 48
P650 50
P700 52
P750 54
[0103] : Version 1.03
[ 410] : R410A
[H-20] : Cooling/Heating 20 HP
For the first few minutes after power on, the capacity of
each outdoor unit is displayed. Thereafter, the com-
bined capacity is displayed.
[ 51] : Address 51
Model
P800
P850
P900
P950
P1000
P1050
P1100
P1150
P1200
P1250
P1300
P1350
- 290 -
Remarks
GB