Dpt Feature Programming For Kx-Tde, Kx-Tda, And Kx-Taw Series Pbxs; Programming Your Extension For Lcs - Panasonic KX-TVA50 Subscriber's Manual

6.1 Programming Your Extension for LCS

6 DPT Feature
Programming for
KX-TDE, KX-TDA, and
KX-TAW Series PBXs
The following VPS features are functional
on any KX-T7xxx proprietary telephone that
is connected to the PBX.
Programming procedures and
availability may vary by PBX model,
software version, etc. Refer to the
documentation included with the PBX or
consult your dealer for more
information.
6.1 Programming Your
Extension for LCS
Live Call Screening Button
Assignment
Follow the procedure below to assign an
LCS button on your extension.
1. Enter Personal Programming:
While on-hook, press the PROGRAM
button.
(Display changes to PT-PGM Mode.)
2. Press the Flexible (CO or DSS/BLF)
button you want to assign as the LCS
button.
3. Enter [92].
Screen output: LCS
4. Press the STORE button.
5. Press the PROGRAM button or lift the
handset to exit the Personal
Programming mode.
Live Call Screening Password
Assignment
To allow the Live Call Screening feature to
work at an extension, the extension must
have the LCS button lit. To light this button,
press the LCS button, then enter the
54 Subscriber's Manual
password. This password prevents others
from activating the LCS feature and
listening to your messages as they are
being left.
Note
• For KX-TDE, KX-TDA, and KX-TAW
series PBXs, the term "Live Call
Screening Password" used in this
section indicates the Extension PIN
(Personal Identification Number).
1. Lift the handset or press the
SP-PHONE button.
2. Enter [ 799].
3. Enter [1].
Screen output: Enter PIN
4. Enter a password (max. 10 digits), then
press [#].
Screen output: Enter PIN Again
5. Re-enter the password, then press [#].
You will hear a confirmation tone, then a
dial tone.
Screen output: PIN set
6. Hang up or press the SP-PHONE
button.
Live Call Screening Password
Canceling
To cancel the LCS password, follow the
procedure below.
Note
• For KX-TDE, KX-TDA, and KX-TAW
series PBXs, the term "Live Call
Screening Password" used in this
section indicates the Extension PIN
(Personal Identification Number).
1. Lift the handset or press the
SP-PHONE button.
2. Enter [ 799].
3. Enter [0].
Screen output: Enter PIN
4. Enter the extension's password.
You will hear a confirmation tone, then a
dial tone.
Screen output: PIN cleared
Document Version 3.0 2010/06