Kenwood KDC-MP5036U Service Manual page 10

KDC- MP5036U/MP535U/W6537U/
W6537UY/X591
[5] Key pressed briefl y: Number of CD EJECT times is
key displayed.
Press and hold: To clear CD EJECT times (Press and hold
for 2 seconds while the CD EJECT time is displayed.)
(Display) EJCxxxxx
[6] Key pressed briefl y: Number of times PANEL is opened/
key closed is displayed.
Press the key for more than 2 seconds while the PANEL
open/close count is displayed to clear the PANEL open/
close count.
(Display) PC_xxxxx
[FM] Key pressed briefl y: ROM correction version is displayed.
key When E2PROM is not installed: ERR_
When not written in: R – – – – _ _ _
(Display) R1234 _ _ _ When data not matching: R∗∗∗∗_ _ _
[ ] Key pressed briefl y: AUDIO data initialization
key (Display) AUD_INIT
[ ] Key pressed briefl y: Forced Power OFF data displayed.
key Press and hold: To clear the forced power OFF information.
(Press and hold for 2 seconds while the forced power OFF
data is displayed.)
(Display) POFF _ – – – (No Forced Power OFF)
SEC (Forced Power OFF because of
PNL (Forced Power OFF because
[AUD] Key pressed briefl y: iPod authentication IC installation status
key display (iPod 2Wire supporting model)
(Display) iPOD_ OK_ (Installation status OK)
NG (Installation status NG)
[ ] Key pressed briefl y: CD information display mode ON
∗Please refer to the next table.
key
● CD information display mode
I2C communication condition display
(Display) I2C_OK_ _
NG
CD mechanism error log display [switched by [
(Display) MCERR1: xx ↔ MCERR2: xx ↔ MCERR3: xx ↔
MCERR1: xx ↔
("– –" or an error code is displayed for "xx".)
[AM] CD loading error log display
(Display) LDERR1: xx ↔ LDERR2: xx ↔ LDERR1: xx ↔
key
↑
(Number of times is displayed for "xx".)
CD ejection error log display
(Display) EJERR1: xx ↔ EJERR2: xx ↔ EJERR3: xx ↔
EJERR4: xx ↔ EJERR1: xx ↔
(Number of times is displayed for "xx".)
10
TEST MODE
MAX 65535 (times)
MAX 65535 (times)
missing Security Code)
of system µ-com and panel
communication error)
] / [ ] keys]
[switched by [ ] / [ ] keys]
MAX 99 (times)
[switched by [ ] / [ ] keys]
MAX 99 (times)
CD time code error count data display (missing counts)
↓
(Display) CNT_LOSE ↔ CDDA_ _xx ↔ CDROM_xx ↔
CNT_LOSE ↔
[FM]
key
(Number of times is displayed for "xx".)
CD time code error count data display (count not updated)
(Display) CNT_STAY ↔ CDDA_ _xx ↔ CDROM_xx ↔
CNT_STAY ↔
(Number of times is displayed for "xx".)
[ ] Key pressed briefl y: CD information display mode OFF
key Press and hold: To clear entire CD information (Press and
hold for 2 seconds)
● Initializing AUDIO-related setting value
Press the [ ] key briefl y in the STANDBY source and
reset the AUDIO setting value to the test mode default
value.
● Other
• At Power ON, "CODE_OFF", "CODE_ON" displays will
not be made.
• During STANDBY sourcing, by pressing [AUTO] or [TI]
key, for less than 1 second GREEN/RED of the key
illumination is switched. (Model with illumination switched
function only)
With KDC-X591 model, which is installed with Display
Blackout function, switching will be made in the following
order :
Key illumi
KDC-X591
GREEN RED (BLUE) GREEN
q
OFF
w
OFF
e
OFF
r
OFF
* With the hardware configuration, when either GREEN/
RED of the key illumination could lights up, the RED of
the triangle illumination is to be lighted.
When desir ing to light up GREEN of the tr iangle
illumination, turn off both GREEN and RED of the key
illumination.
• During STANDBY sourcing, by pressing [AUTO] or [TI]
key for at least 1 second, Rear/Sub Woofer of PREOUT is
switched. (Model with 2-PREOUT)
[switched by [ ] / [ ] keys]
MAX 99 (times)
[switched by [ ] / [ ] keys]
MAX 99 (times)
Triangle illumi
RED
ON OFF ON
OFF ON OFF
ON OFF ON
OFF ON OFF