Table of Contents
Advertisement
Direct Key Programming
Use the following procedure to select direct-key programming:
Direct PLU/COMBO/Dept. key
You can assign PLUs, combo meals and departments directly to the keyboard. In the case of combo meals
or PLUs, you may assign up to 10-levels to be accessed directly on the keyboard.
Select a pertinent key no. from the
key numbers list (Refer to the next
page).
In the case of setting "000001 DIRECT PLU"
1.
In the SETTING window, select "2 DIRECT KEY."
• The DIRECT KEY window will appear.
• TYPE (Use the selective entry)
PLU:
Assigns the key as a direct PLU key.
COMBO: Assigns the key as a direct combo key.
DEPT:
Assigns the key as a direct department key.
NOTE
• You can also select a direct PLU key by pressing the
corresponding key when the PLU has been assigned directly
on the keyboard instead of selecting the key from the menu.
• When selecting a department, the screen on which a
department number is to be entered (the message "DEPT.
CODE") will appear.
• When selecting a combo, the screen on which a combo table
number is to be entered ("COMBO TBL#") will appear.
• LEVEL1 thru 10 (Use the numeric entry)
Enter a PLU number or combo table number for each level.
For example, if you want to use this key as PLU no.1 (level
1) and PLU no.101 (level 2), enter 1 for the "LEVEL1" and
101 for the "LEVEL2."
109
Advertisement
Table of Contents
