Checking The Connections - Yamaha YJ125S Service Manual

CHECKING THE CONNECTIONS

1-4
EAS00026
CHECKING THE CONNECTIONS
Check the leads, couplers, and connectors for
stains, rust, moisture, etc.
1. Disconnect:
8 lead
8 coupler
8 connector
2. Check:
8 lead
8 coupler
8 connector
Moisture Dry with an air blower.
Rust/stains
several times.
3. Check:
8 all connections
Loose connection
NOTE:
If the pin 1 on the terminal is flattened, bend it
up.
4. Connect:
8 lead
8 coupler
8 connector
NOTE:
Make sure all connections are tight.
5. Check:
8 continuity
(with the pocket tester)
Pocket tester
90890-03132 (YU-03112-C)
NOTE:
8 If there is no continuity, clean the terminals.
When checking the wire harness, perform
steps (1) to (3).
8 As a quick remedy, use a contact revitalizer
available at most part stores.
GEN
INFO
Connect and disconnect
Connect properly.